Let your radio know where it is with this GPS receiver and adaptor. Connect the jack directly to the data port on your compatible radio (see list below), supply 13.8v from your PSU and place the GPS unit somewhere with a clear view of the sky. This unit is very unlikely to work sitting in your shack where the sky is obstructed.

This is the mobile version with a GPS puck and 2 meters of cable. Perfect for mobile or portable use and good for the shack if you don’t need much cable to reach outside. The GPS unit cable can be extended with a standard serial extension cable (up to 5 meters extra maximum for best performance)

Supplied with:

• Waterproof GPS unit with 3M adhesive base and 2 meters of cable
  
• Adaptor box (complete with 1 meter 2.5mm TRS jack cable and 1 meter of twin core power cable)
• Select stripped and tinned, 15 Amp Anderson PowerPole (crimped and soldered) or 6.4mm Ring Terminals (crimped and soldered) power connector

Features:

• Chipset: M8030-KT
  
• RX Format: GPS
• Channels: 72 (searching)
• Baud Rate: 4800bps
• Supply Voltage: 13.8v DC
• Supply Current: 110mA

Compatible radios (choose from drop down when ordering):

• Icom IC-9700
• Kenwood TM-D700/D710E
• Yaesu FTM-400
• Contact me if you have another radio with a 2.5mm or 3.5mm GPS data input

Please note that all of my products are handmade in my own workshop and may be subject to slight manufacturing variations. There is up to 2 days additional wait once ordered before shipping due to final assembly and testing for the chosen version.